Borg Warner Turbos

Borg Warner turbocharger was created when 3K and Schwitzer merged to form the ultimate team of turbocharger developers.  These companies have over 60 years of experience developing and creating turbochargers.  Today this well know and respected company continues to set the mark for new technological standards in the turbocharger business.  With their experience and knowledge it is not a surprise that many people trust and use Borg Warner turbochargers in their car, boat, or other system.

Borg Warner S400's

By extending the ends of the compressor wheel, BorgWarner has effectively increased the pressure ratio, efficiency and flow of the entire compressor.

This gives the S200, S300 & S400 pressure ratios and efficiencies that can normally only be had with larger, slower spooling turbos.
The extended fins do not hamper spool-up. The compressor wheel is designed to remove excess weight, reducing overall rotating mass. Of particular importance is the reduction of weight at the outer edges which is a major factor for reducing inertia. The weight reduction and where it is reduced allows these compressor wheels to spool FAST.

Another factor that increases the efficiency of the turbo as well as overall flow is the height of the compressor wheel blades. The BorgWarner extended tip version is over 20% taller than the standard 50 trim. The theory that the longer the air stays on the blades the more boost you can run and the more air it will flow thus improving the aerodynamics of the turbo. This extended tip compressor wheel is rated at more than 55 lbs/min vs. the standard 50 trim at only 49 lbs/min.

Borg Warner S400 (500HP - 700HP)

 

Borg Warner S400SX4 (750HP - 1250HP )